Filter by solution:

Filter by market:

Milling & Grinding

Hamex® Semi Automatic Hammer Mill

Hamex® Semi Automatic Hammer Mill

Available on request
  • A semi-automatic sifter changing system
  • Minimal noise levels, while maximizing the grinding speed
  • Good accessibility allows worn parts to be replaced quickly

Markets

  • Food & Pharma
  • Petfood
  • Feed & Aquafeed
  • Chemicals & Minerals
More info
Hamex® Fully Automatic Hammer Mill

Hamex® Fully Automatic Hammer Mill

Available on request
  • A fully automatic sifter changing system
  • A minimal noise level without negatively affecting the grinding speed
  • Increased production capacity

Markets

  • Food & Pharma
  • Petfood
  • Feed & Aquafeed
  • Chemicals & Minerals
More info
Dinnox Hammer Mill

Dinnox Hammer Mill

Available on request
  • Easy to clean thanks to one-sided bearing and stainless-steel design
  • Variable rotor speed
  • Testing possibilities in Dinnissen test facility

Markets

  • Food & Pharma
  • Petfood
  • Feed & Aquafeed
  • Chemicals & Minerals
More info
Centrifugal Mill

Centrifugal Mill

Available on request
  • Long service life and low maintenance thanks to the proven robust construction
  • Optimized for decades for efficiency, capacity, and uptime
  • Hygienic and dust-proof design, also available as EHEDG version

Markets

  • Food & Pharma
  • Petfood
  • Feed & Aquafeed
  • Chemicals & Minerals
More info
Roller Mills

Roller Mills

Available on request
  • Low finesse proportion leaving a larger part of the product usable
  • Low heat generation
  • High capacity

Markets

  • Food & Pharma
  • Petfood
  • Feed & Aquafeed
  • Chemicals & Minerals
More info
Shredder

Shredder

Available on request
  • Uniform product reduction
  • Adjustable cutting speed
  • Easily changeable knives

Markets

  • Food & Pharma
  • Petfood
  • Feed & Aquafeed
  • Chemicals & Minerals
More info
Pulper

Pulper

Available on request
  • Meets the strictest hygiene requirements through simple and thorough cleaning
  • High capacity
  • Homogeneous pulping

Markets

  • Food & Pharma
  • Petfood
  • Feed & Aquafeed
  • Chemicals & Minerals
More info
Hamex® Hammer Mill

Hamex® Hammer Mill

Available on request
  • Proven robust construction: long life and low maintenance
  • Variable direction of rotation to spread wear
  • Optimized over decades for efficiency, capacity, and uptime

Markets

  • Food & Pharma
  • Petfood
  • Feed & Aquafeed
  • Chemicals & Minerals
More info
Breaker

Breaker

Available on request
  • Long service life and low maintenance thanks to the proven robust construction
  • Optimized for decades for efficiency, capacity, and uptime
  • Hygienic and dust-proof design, also available as EHEDG version

Markets

  • Food & Pharma
  • Petfood
  • Feed & Aquafeed
  • Chemicals & Minerals
More info

Do you have a question about your process challenge?

  • 75 years of experience in your sector as a system integrator
  • Everything in-house: engineering, production, testing, installation, control and service
  • Always a tailor-made solution, for your complete process

contact us

Rieks Reyers is ready
to help you

+31 (0)77 467 35 55
[email protected]

We are proud that these companies rely on Dinnissen

Nestle
Nutreco
DSM
Danone
BAYER

View all of our references

What customers say about us

Mixing time of 60 seconds per batch

Previously, we had standard times in the mixing process of 14 - 15 minutes. With the Pegasus® mixer we achieve a mixing time of 60 seconds per batch.

Planta

Lothar Pixa- Director - Planta

Read more

Six-fold increase of total production

Production has gone from 3-5 tons per day to 30 tons per day. That's a six-fold increase in total production.

Nöll & Co.

Michiel de Boer- CEO - Nöll & Co.

Read more

Filled three complete factories

Dinnissen has filled an entire factory for us with a complete production line, on three different occasions. They just get it right: from mixers and sifters to sampling and automation.

Jonker & Schut

Erik Schut- Managing Director - Jonker & Schut

Read more

No challenge is too big

At Dinnissen, they think in terms of challenges, not problems. They don't give up and keep going until there is a solution that satisfies all parties.

United Petfood

Martin Sonneveld- Production Director - United Petfood Waalwijk

Read more

The importance of hygiene and safety requirements

Dinnissen fully understood the importance of hygiene and safety requirements in our industry. They went the extra mile by providing us with all the necessary documentation, all ATEX drawings, and full traceability.

DSM

Anton Vleeshouwers- Project Director - DSM

Read more

High-quality vacuum coaters

We chose to work with Dinnissen because they supply high-quality vacuum coaters that fit exactly within our production lines.

Olam Group

Arnold Balledux- Global Technical Head Animal Feeds & Vice-president Animal Feed & Protein - Olam Agri

Read more

Service on weekends

One day there was an important issue and one of Dinnissen's engineers immediately took action during the weekend. I have never seen other foreign partners do this.

APTe Japan

Mr. Kimio Aono- Founder - APTe Japan

Read more

Drastically improved feed-quality

90% of our customers with laying hens have already switched to the new feed produced using the Pegasus® mixer and the Thermidor® system.

Egli Mühlen

Kurt Egli- Former manager - Egli Mühlen

Read more

Customized mixers

Dinnissen thought along with us from start to finish. For example, they used existing drawings for these new mixers to save us costs in the engineering phase.

ForFarmers

Pieter Gorter- Project Manager - ForFarmers

Read more

Quadrupled production capacity

In collaboration with Dinnissen, we have quadrupled our production capacity from 3 to 12 tons per hour.

Solan

Harald Schmalwieser- Managing Director - Solan

Read more

Fully automated sampling

We considered several machine developers, but the high quality of the Dinnissen machines and the competence and commitment of the employees were decisive for us.

Ausnutria

Arjan van Dijk- Project Manager - Ausnutria

Read more

Technicians, not salespeople

Dinnissen's representatives strive for the best solutions. They are engineers first and salespeople second.

Van Zutven

Frans van Zutven- Founder and Director - Van Zutven

Read more

World player in process technology

To realize production processes of the best quality, we work closely with Dinnissen: One of the strongest players in the world in process technology and hygienic design.

Nestle

Gerben Koopmans- Project Engineering Manager - Nestlé

Read more

Tailor-made solution for every problem

What charmed us most about Dinnissen was that they responded perfectly to our questions each time: they jumped right in and quickly came up with a tailor-made solution to each problem.

Perstorp

Jos Falvay- Project manager - Perstorp

Read more

Mixers have been running 30 years

Dinnissen machines may not be the cheapest in terms of purchase price, but in terms of value for money, there are none better. Our Dinnissen mixer has been running extremely reliably for 30 years.

VDV Group

Adwin van der Vorst- Directeur - VDV Group

Read more