3D image of a Dinnox Hammer Mill
3D image of a Dinnox Hammer Mill
3D image of a Dinnox Hammer Mill
image of a Dinnox Hammer Mill
image of a Dinnox Hammer Mill
image of a Dinnox Hammer Mill
image of a Dinnox Hammer Mill
image of a Dinnox Hammer Mill
image of a Dinnox Hammer Mill
3D image of a Dinnox Hammer Mill
3D image of a Dinnox Hammer Mill
3D image of a Dinnox Hammer Mill
image of a Dinnox Hammer Mill
image of a Dinnox Hammer Mill
image of a Dinnox Hammer Mill
image of a Dinnox Hammer Mill
image of a Dinnox Hammer Mill
image of a Dinnox Hammer Mill

Dinnox Hammer Mill

Available on request

Thanks to its one-sided bearing and sleek stainless-steel design, the Dinnox Hammer Mill is ideally suited for industries in which hygiene is extremely important. The one-sided bearing ensures that the rotor can be driven completely out of the housing, for cleaning, inspection, changing the beating edges and adjusting the hammer assignment. In addition, the sifting plates are easily accessible through doors and can be quickly changed, making this mill very suitable for an efficient production process. The Dinnox Hammer Mill enables fineness ranges between 150 microns and 3 mm.

  • Easy to clean thanks to one-sided bearing and stainless-steel design
  • Variable rotor speed
  • Testing possibilities in Dinnissen test facility

Contact us

Compact and reliable hammer mill

The grinding principle of the stainless steel Dinnox Hammer Mill is based on years of experience in the hammer mill industry. The Dinnox hammer mill is characterized by a very compact design, a variable rotor speed and a one-sided bearing. The capacity of the Dinnox hammer mill is between 30 and 6000 kg per hour, depending on the product and the desired final fineness. The Dinnox Hammer Mill complies with the EHEDG guidelines and because of its stainless-steel design it is ideally suited as a grinding step in the food industry or in a grinding process where wet cleaning is involved.  

Dinnissen offers you a great deal of expertise in the field of product grinding with a wide range of final finishes. We continue to develop our mills to make them ever more efficient, productive, hygienic, and reliable. The Dinnox Hammer Mill was developed with a view to the strict hygiene requirements that mills in, for example, the food industry must meet. All Dinnox Hammer Mills are designed as follows:

  • Hygienic grinding due to stainless-steel and one-sided bearings
  • Variable rotor speed  
  • Validated milling principle
  • Good accessibility: wear parts can be replaced quickly  
  • Designed, developed, and tested in-house


Dinnox Hammer Mill (3D)
Dinnox Hammer Mill (3D)

Key features, options, and models

The Dinnox Hammer Mill is designed for industries with strict hygiene requirements. The one-sided bearing makes it possible to drive the rotor completely out of the housing. This makes cleaning, inspection, change of stroke bars and adjustment of the hammer assignment very easy. The rotor speed is variable, and the final fineness can be set between 150 microns and 3 mm. The capacity of the Dinnox Hammer Mill is between 30 and 6000 kg per hour, depending on the product and the desired final fineness. The stainless-steel design makes the Dinnox Hammer Mill very suitable for food processing and wet cleaning processes. The Dinnox Hammer Mill can be tested with your product in our test room.

More information about the options, features, and dimensions?

How does a Dinnox Hammer Mill work?

In the hammer mill, freely suspended percussion hammers swing around at high speed. The resulting centrifugal force crushes the grinding material against the special crushing plates inside the grinding chamber. The crushed product then leaves the hammer mill through the replaceable sifter. Depending on the properties of the product to be ground, single hammers, double hammers, or T-hammers are used.

DinnoX hygienic Hammer mill

Would you like to know more about the Dinnox Hammer Mill?

Download our brochure or the datasheet with all options, models, and measurements or freely contact one of our experts.

Piet van Bommel is ready
to help you

+31 (0)77 467 35 55
[email protected]


Besides hammer mills, we can achieve the desired grain or product size with various grinding and crushing solutions. From shredders and breakers to grinders and grinding mills: together we look at which solution is most suitable for your product and production process.

View all solutions for Milling & Grinding

Solutions for your entire process

System integrator Dinnissen optimizes and innovates your production process with tailored solutions: developed, manufactured and tested in-house. From product intake, transport, dosing and weighing, mixing, grinding, sieving and packaging to full automation and control. We maximize the performance and efficiency of your entire process.

view our machines, systems and process lines

Dinnissen wallpaper big bag
  1. System Integration
  2. Product intake
  3. Conveying & Handling
  4. Feeding & Weighing
  5. Mixing & Processing
  6. Milling & Grinding
  7. Sifting
  8. Packaging
  9. Automation & Control

We are proud that these companies rely on Dinnissen


View all of our references

What customers say about us

Filled three complete factories

Dinnissen has filled an entire factory for us with a complete production line, on three different occasions. They just get it right: from mixers and sifters to sampling and automation.

Jonker & Schut

Erik Schut- Managing Director - Jonker & Schut

Read more

Mixing time of 60 seconds per batch

Previously, we had standard times in the mixing process of 14 - 15 minutes. With the Pegasus® mixer we achieve a mixing time of 60 seconds per batch.


Lothar Pixa- Director - Planta

Read more

Drastically improved feed-quality

90% of our customers with laying hens have already switched to the new feed produced using the Pegasus® mixer and the Thermidor® system.

Egli Mühlen

Kurt Egli- Former manager - Egli Mühlen

Read more

Six-fold increase of total production

Production has gone from 3-5 tons per day to 30 tons per day. That's a six-fold increase in total production.

Nöll & Co.

Michiel de Boer- CEO - Nöll & Co.

Read more

High-quality vacuum coaters

We chose to work with Dinnissen because they supply high-quality vacuum coaters that fit exactly within our production lines.

Olam Group

Arnold Balledux- Global Technical Head Animal Feeds & Vice-president Animal Feed & Protein - Olam Agri

Read more

Technicians, not salespeople

Dinnissen's representatives strive for the best solutions. They are engineers first and salespeople second.

Van Zutven

Frans van Zutven- Founder and Director - Van Zutven

Read more

Mixers have been running 30 years

Dinnissen machines may not be the cheapest in terms of purchase price, but in terms of value for money, there are none better. Our Dinnissen mixer has been running extremely reliably for 30 years.

VDV Group

Adwin van der Vorst- Directeur - VDV Group

Read more

Customized mixers

Dinnissen thought along with us from start to finish. For example, they used existing drawings for these new mixers to save us costs in the engineering phase.


Pieter Gorter- Project Manager - ForFarmers

Read more

Service on weekends

One day there was an important issue and one of Dinnissen's engineers immediately took action during the weekend. I have never seen other foreign partners do this.

APTe Japan

Mr. Kimio Aono- Founder - APTe Japan

Read more

Quadrupled production capacity

In collaboration with Dinnissen, we have quadrupled our production capacity from 3 to 12 tons per hour.


Harald Schmalwieser- Managing Director - Solan

Read more

Tailor-made solution for every problem

What charmed us most about Dinnissen was that they responded perfectly to our questions each time: they jumped right in and quickly came up with a tailor-made solution to each problem.


Jos Falvay- Project manager - Perstorp

Read more

No challenge is too big

At Dinnissen, they think in terms of challenges, not problems. They don't give up and keep going until there is a solution that satisfies all parties.

United Petfood

Martin Sonneveld- Production Director - United Petfood Waalwijk

Read more

Fully automated sampling

We considered several machine developers, but the high quality of the Dinnissen machines and the competence and commitment of the employees were decisive for us.


Arjan van Dijk- Project Manager - Ausnutria

Read more

World player in process technology

To realize production processes of the best quality, we work closely with Dinnissen: One of the strongest players in the world in process technology and hygienic design.


Gerben Koopmans- Project Engineering Manager - Nestlé

Read more

The importance of hygiene and safety requirements

Dinnissen fully understood the importance of hygiene and safety requirements in our industry. They went the extra mile by providing us with all the necessary documentation, all ATEX drawings, and full traceability.


Anton Vleeshouwers- Project Director - DSM

Read more